PROVITEC Waterfilter
THE PROVITEC DRINK WATER SYSTEMS Easy installation, elegant design …
INSTALLATION Treatment and removal of drinking water:
Since everyday drinking and cooking water is usually tapped only in the kitchen, the PROaqua 4200 has been designed to fit under the kitchen sink. Thus, clean, contamination free, microbiologically impeccable water with a pleasant taste is always available for the user from a separate tap, (fig.1) or from a special design faucet with separate outlet function for filtered water. (fig.2) However, the filter can be installed completely individually, even before and after machines and appliances, where a flow rate of approx. 2.5 l/min is sufficient (industrial design 4.5 l/min), but where uncontaminated, softened or partially softened water is required. The installation usually takes about 45 minutes.
Installation on the kitchen sink under table, with separate faucet:
Therefore, an additional faucet is installed only for to take drinking water. The existing faucet can still us for the extraction of raw water (rinse water, etc.). More detailed information can be provided on request. Kitchen special double faucets with an additional outlet for connection to a drinking water filter. This have also "normal" exit for the extraction of raw water (rinse water, etc.). More detailed information can be provided on request.
Installation on the kitchen sink under table, with special double-tap:
PROdesign PROdesign PROdesign 101 301 302
(fig.1)
(fig.2)